Using our new favorite tool LxRunOffline let’s make back up of a distro on our PC.

However, as one starts down the path of using LxRunOffline, there is a slight issue when it comes to WSL2 Distros:

lxrunoffline export -n openSUSE-Leap-15-1 -f suse.tar.gz
[ERROR] The action/argument “export” doesn’t support WSL2.

Ok, not a huge problem… this article just got longer…. LxRunOffline export will work for WSL 1 type Distros… So let’s do an example of both using LxRunOffline and WSL utilities.

For WSL 1 type Distros:

LxRunOffline has a command called List- from a Powershell window my list looks like this

LxRunOffline.exe list

fedoraremix
docker-desktop
Debian
Ubuntu-18.04
Ubuntu
openSUSE-Leap-15-1
docker-desktop-data
WLinux
Ubuntu-20.04
kali-linux

Now the LX tool has a command to do a backup. This collects the distro into a Linux tar file (in Linux terms a compressed tape file).

LxRunOffline export –n <NameOfDistro> –f <pathAndNameOfExportFile>

That’s the general format of the export.

Now before one goes about exported a Distro – I would really do a WSL –shutdown Why? I think it’s best not to have any Distro’s running when you are trying to export them. It’s not a 100% required, but it is a good practice.

For WSL 2 type Distros:

Still do the WSL –shutdown.

Now we use the WSL command to backup the Distro. Like the LX tool, WSL has basically the same set of commands.
Get a list of Distros with:

wsl --list
Windows Subsystem for Linux Distributions:
Ubuntu-20.04 (Default)
fedoraremix
docker-desktop
Debian
Ubuntu-18.04
Ubuntu
openSUSE-Leap-15-1
docker-desktop-data
WLinux
kali-linux

And the backup command for WSL:

wsl --export WLinux .\PengWin.tar.gz

dir

    Directory: D:\cse.Linux

Mode                 LastWriteTime         Length Name
----                 -------------         ------ ----
-a---          10/17/2020 12:46 PM     9039769600 PengWin.tar.gz

Now we have in either case a copy of our Distro that can be imported on another PC with WSL.

When using WSL.exe

WSL

--import <Distro> <InstallLocation> <FileName> [Options]
        Imports the specified tar file as a new distribution.
        The filename can be - for standard input.

        Options:
            --version <Version>
                Specifies the version to use for the new distribution.

The –import command  Allows one to name the Distro, install to a location, from a filename. The options here, –version allows one to change the WSL version while it’s being imported.

Now LXRunOffline is a little different:

lxrunoffline install

Options:
  -n arg                Name of the distribution
  -d arg                The directory to install the distribution into.
  -f arg                The tar file containing the root filesystem of the
                        distribution to be installed. If a file of the same
                        name with a .xml extension exists and "-c" isn't
                        specified, that file will be imported as a config file.
  -r arg                The directory in the tar file to extract. This argument
                        is optional.
  -c arg                The config file to use. This argument is optional.
  -v arg (=2)           The version of filesystem to use, latest available one
                        if not specified.
  -s                    Create a shortcut for this distribution on Desktop.

As we see the install command has a few more options beyond Name, Directory, and tar filename.

Happy WSL’ing,

Prev Article: Moving your installed WSL Linux Distro

Go Back to Index of WSL articles

~SG

So what’s the problem with c:\users\<YourUserName>\AppData\Local?  where do I begin… protected? hidden? Filling up your c: drive… pick one. But the most annoying one when it comes to Windows WSL distros… the install places these in the package folder. So c:\users\<YourUserName>\AppData\Local\Packages, and it does it in a way that usually involves a GUID like naming… Get the picture?

Ok, enough harping on it… Let’s get to moving things about.

You start with getting the most handy little utility called LxRunOffline. You can go to their GitHub page:

[visual-link-preview encoded=”eyJ0eXBlIjoiZXh0ZXJuYWwiLCJwb3N0IjowLCJwb3N0X2xhYmVsIjoiIiwidXJsIjoiaHR0cHM6Ly9naXRodWIuY29tL0REb1NvbGl0YXJ5L0x4UnVuT2ZmbGluZSIsImltYWdlX2lkIjotMSwiaW1hZ2VfdXJsIjoiaHR0cHM6Ly9hdmF0YXJzMy5naXRodWJ1c2VyY29udGVudC5jb20vdS8yNTg1NjEwMz9zPTQwMCZ2PTQiLCJ0aXRsZSI6IkREb1NvbGl0YXJ5L0x4UnVuT2ZmbGluZSIsInN1bW1hcnkiOiJBIGZ1bGwtZmVhdHVyZWQgdXRpbGl0eSBmb3IgbWFuYWdpbmcgV2luZG93cyBTdWJzeXN0ZW0gZm9yIExpbnV4IChXU0wpIC0gRERvU29saXRhcnkvTHhSdW5PZmZsaW5lIiwidGVtcGxhdGUiOiJ1c2VfZGVmYXVsdF9mcm9tX3NldHRpbmdzIn0=”]

Lots of mucking about with install verbiage (that’s a bit on the side of… yeah you really don’t need to do all of that on windows 10). Just go to the release page and download the zip file already:

[visual-link-preview encoded=”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”]

Unzip to a favorite directory… one that is in your execute path works fine. This gives one a exe that will execute from either a command window or powershell.

So let’s step through it…

First go ahead and install one or more of your favorite distros for WSL.

Next we move it….

##
##  We will do this in Powershell
##
##  Start with choosing a place we want our distro's to live... in my case the root distro I do is D:\cseWSL\<distroName>
##

## Find your user
##
D:\>whoami

## I get something like
mysystem\scott

## Next for the location you wish to move the distro to... i.e. in my case d:\cseWSL\Ubuntu18
## I'm doing my Ubuntu 18.04 
##  We set some access control to that directory
icacls d:\cseWSL\Ubuntu18 /grant "scott:(OI)(CI)(F)"
## Here we are setting some inheriate properties and full file access to my user
## you can lookup icacls and what those parameters are from the internet

## Finding out what the distro names are
##
LxRunOffline list 

Ubuntu

##This is same as the WSL -l  command

## You can list the current location of a distro using
LxRunOffline get-dir -n Ubuntu
## The -n <distro Name> is required for the get-dir command
## For my Fedora distro I get something like this
....  \AppData\Local\Packages\WhitewaterFoundryLtd.Co.FedoraRemixforWSL_kd1vv0z0vy70w\LocalState

## Now the magic part... Moving a distro
LxRunOffline move -n Ubuntu -d d:\cseWSL\Ubuntu18
##  the -n and -d are required for the move command
##  if the named distro exists and the directory exists, then this will move the distro over
##
## To check that everything is ok with the move
## Do another LxRunOffline get-dir -n
## and see the new location
##
## Then of course, run your distro to make sure it starts up
## LxRunOffline provides a run command
LxRunOffline run -n Ubuntu

## Or start the moved distro in the normal way


 

Seems a little much to do… but not really.  It comes down to Create a Directory destination, set some permissions, and then run a command.

There we are… distros located in a Happy Place.

Next up: Backing up your WSL Distro and Copying it to another PC

Back to Index of WSL Articles

~SG

I make no apologies when I say I’m not huge Linux fan, but I’m also not lacking when it comes to understanding how to utilize this OS in my Microsoft world.

First off, I’m not a newbie when it comes to matters of Linux or Unix- I spent a number of years working on HP UX with Window-X/Motif apps I had to support (so to all the Linux Trolls… yeah whatever).

So why is a “Microsoft Heavy” a.k.a. Me, ScottGeek bothering with the Linux side? Simple, over the past few years with MS moving to an inclusive approach with it’s Development tooling for cross OS apps, why wouldn’t I add Linux to my stack? Now don’t get me wrong, I’m not about to start writing code in Java or some other fork of the C language beyond C#.  But Linux as a OS to deploy apps on, Linux as an IOT host, Linux as an place to share my API’s that the non-MS folks want to use- yeah that works.

So shall we begin with some topics on WSL:

Moving your installed WSL Linux Distro
Backing up your WSL Distro and Copying it to another PC

~SG